Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
ChoiYunSoo
Contributor

I have a question about Cluster XL error messages

Hi, I have a question about Cluster XL error messages

 

An issue occurred in which the customer's firewall did not receive ccp packets normally

It was identified as a switch problem and normalized after changing the switch port.

But i have a question here

The message from the customer's firewall is 'CLUS-120207-2: LPRB PNOTE: local probing has started on interface eth1'

Can you tell me what the '-2' in 'CLUS-120207-2' represents here?

What I'm suspecting is 'local, remote', 'member1, member2'

 

I checked the cluster error message in 'sk125152', but unfortunately it doesn't show what I'm curious about.

If you know anything about the above, please let us know.

 

 

Thanks

0 Kudos
5 Replies
G_W_Albrecht
Legend
Legend

0 Kudos
ChoiYunSoo
Contributor

thank you for the reply

 

This issue is a case where troubleshooting has been completed.

What I want to know is what is '-2' in 'CLUS-12xxxx-2'

 

0 Kudos
PhoneBoy
Admin
Admin

I recommend a TAC case here.

0 Kudos
ChoiYunSoo
Contributor

I think it would be better to proceed with the case according to your advice.

Thank you for your reply.

0 Kudos
the_rock
Legend
Legend

I had TAC case about that exact message while ago and thats what they told me it means, -2 for backup member and -1 would be current active.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events