I have a question about Cluster XL error messages

[ChoiYunSoo]

Hi, I have a question about Cluster XL error messages

An issue occurred in which the customer's firewall did not receive ccp packets normally

It was identified as a switch problem and normalized after changing the switch port.

But i have a question here

The message from the customer's firewall is 'CLUS-120207-2: LPRB PNOTE: local probing has started on interface eth1'

Can you tell me what the '-2' in 'CLUS-120207-2' represents here?

What I'm suspecting is 'local, remote', 'member1, member2'

I checked the cluster error message in 'sk125152', but unfortunately it doesn't show what I'm curious about.

If you know anything about the above, please let us know.

Thanks

[G_W_Albrecht]

sk171844: How to troubleshoot the Critical Device "Local Probing" in ClusterXL

[ChoiYunSoo]

thank you for the reply

This issue is a case where troubleshooting has been completed.

What I want to know is what is '-2' in 'CLUS-12xxxx-2'

[PhoneBoy]

I recommend a TAC case here.

[ChoiYunSoo]

I think it would be better to proceed with the case according to your advice.

Thank you for your reply.

[the_rock]

I had TAC case about that exact message while ago and thats what they told me it means, -2 for backup member and -1 would be current active.