Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
starmen2000
Collaborator
Collaborator
Jump to solution

Get Interfaces with topology

Hi Mates,

 

I want to create a new vlan on the cluster. After creating via cli or webui, how can I add it on smartconsole. I know that there is option get interfaces with topology or without topology. But I dont want to affect other interfaces. So many times I heard that dont do get interfaces with topology in production.  There is also another option add interface manually, but I want to know, How is the best way? 

 

0 Kudos
1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

On initial setup, using Get Interfaces with Topology is fine.
Once you have a gateway in production, it's generally advisable to not use this option.

View solution in original post

(1)
3 Replies
Chris_Atkinson
Employee Employee
Employee

Knowledge articles such as sk57100 also recommend 'Get Interfaces Without Topology'

CCSM R77/R80/ELITE
(1)
PhoneBoy
Admin
Admin

On initial setup, using Get Interfaces with Topology is fine.
Once you have a gateway in production, it's generally advisable to not use this option.

(1)
the_rock
Legend
Legend

What @PhoneBoy said is EXACTLY what literally every customer would suggest. Get interface with topology will "reset" everything to default and that is NOT what you want, when firewall is in production, so I would suggest to always do "without topology". Hope that helps.

Andy

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events