Convert Cisco to checkpoint configuration

Discover the Future of Cyber Security:
What’s New in Check Point’s Quantum R82

Watch Now

Pick the Best of the Best of
CheckMates 2024!

Vote Now!

Share your Cyber Security Insights
On-Stage at CPX 2025

Learn More

Simplifying Zero Trust Security
with Infinity Identity!

Watch Now

Zero Trust Implementation
Help us with the Short-Term Roadmap

CheckMates Go:
What's New in R82

LISTEN NOW

I trying to replace a Cisco device with Checkoint. How do I set the below configuration in checkpoint.

Your suggestions would be highly appreciated

interface GigabitEthernet0/0 description Link to Internet + TWAN ip address 172.17.129.246 255.255.255.252 no ip redirects no ip proxy-arp ip wccp web-cache redirect in ip wccp web-cache group-listen ip flow ingress ip nat outside ip virtual-reassembly in load-interval 30 duplex auto speed auto no cdp enable service-policy input url-block-policy service-policy output WEB-BLOCK !
interface GigabitEthernet0/1 ip address 172.27.156.1 255.255.252.0 no ip redirects no ip proxy-arp ip nat inside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface
GigabitEthernet0/1.2 description LAN_NETWORK TO GEWOG CENTER encapsulation dot1Q 2 ip address 172.26.159.1 255.255.252.0 no ip redirects no ip proxy-arp ip nat inside ip virtual-reassembly in no cdp enable !