Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
shamimalam
Participant

Concurrent session monitoring through Nagios

Hi Expert,

My client want me to enable concurrent session monitoring through Nagios and an alert should be triggered if it exceeds from the limit.

Can you please guide me how to enable this. any of SK is available ? I have R77.20 and R80.40.

0 Kudos
Reply
5 Replies
_Val_
Admin
Admin

What do you mean, "exceeds the limit"? What limit, and how do you define it?

0 Kudos
Reply
shamimalam
Participant

Hi Admin,

We have Concurrent session 60K limit set in Firewall but its showing 60101 Peak connection in #fw ctl pstat. 101 connection is dropping  by Firewall and that can be seen in Zdebug logs.

I want to monitor this Concurrent session through Nagios. Please guide.Pik concurrent connection highlighted.Pik concurrent connection highlighted.

0 Kudos
Reply
_Val_
Admin
Admin

You need to pull concurrent connections with SNMP and set an alarm in your monitoring solution. Look for best practices of monitoring here: sk106126

0 Kudos
Reply
shamimalam
Participant

This is very useful. Thanks for sharing.

Can help share any SK to configure SNMP on VSX.

SNMP is configured on physical FW (in HA) and its sending logs to Monitoring platform but there are seven VSX on this FW. I need help to configure SNMP to all seven VSX.

 

0 Kudos
Reply
Chris_Atkinson
Employee
Employee

Please see sk90860 

Examples:

Provided information SNMP Object ID SNMP Object Name
Number of active connections on Virtual Device .1.3.6.1.4.1.2620.1.16.23.1.1.2 vsxCountersConnNum
Number of concurrent connections .1.3.6.1.4.1.2620.1.1.25.3.0 fwNumConn
0 Kudos
Reply