Check point vsx cluster

[aruns]

How can we make interface state off in vsx cluster . If you know pls provide command for CLI

[PhoneBoy]

I assume this is done via clish on the relevant gateways using something like: set interface ifname state off
That would be after you use the command set virtual-system X (where X is the relevant VSID).

[the_rock]

You can do vsenv command first from expert and then one Phoneboy gave from clish, set interface ifname state off (that should be same command like on regular Gaia)

Andy

[ramakrishnan]

I have a question following by ArunS.

How we going to shutdown the interface when VS in 3 clusters(For example, we need to off the interface clish command all 3 clusters at a time..?) If we off the interface in one cluster, others two cluster member will sync up or bring the inconsistence in the members?

Also, the interface which we want to off is a bond interface, not a physical interface.  

[PhoneBoy]

Interfaces changes like this need to be made manually on each cluster member in a maintenance window.