I'm running R81 on a custom built open server on Bell Fibe. Their SFP+ NIC in their own hardware runs at 2.5gbps to allow 1.5GBPS download and 1GBPS upload. However the NIC I have is limited to 1/10gbps meaning I am leaving alot of bandwidth on the table right now. I was wondering if anyone has any experience with the BCM57810S based NICs and if they are able to be set to 2.5gbps on a Checkpoint Firewall running on open server? I don't want to buy one of these NICs just to find out its still 1/10gbps on Checkpoint.
Has anyone had any success with any SFP+ NICs that run at 2.5gbps at all?
Related documentation for other platforms - https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM5781...
