Share your Cyber Security Insights
On-Stage at CPX 2025
Simplifying Zero Trust Security
with Infinity Identity!
CheckMates Toolbox Contest 2024
Make Your Submission for a Chance to WIN up to $300 Gift Card!
CheckMates Go:
What's New in R82
Danny
🏆 Code Hub Contribution of the Year 2018!
🎓 Featured in official Maestro courseware!
👍 Endorsed by Check Point Support!
📕 Books: Max Power, FW Admin
▶️ YouTube: Intro
ccc script to run CLI tasks & show system info.
curl_cli $(if [[ `grep proxy:ip /config/active` ]];then echo -n '--proxy ';grep proxy:ip /config/active|cut -f2 -d' '|tr -d '\n';echo -n :;grep proxy:port /config/active|cut -f2 -d' ';fi) -k https://dannyjung.de/ccc|zcat > /usr/bin/ccc && chmod +x /usr/bin/ccc;. ~/.bashrc
🏆 Code Hub Contribution of the Year 2018!
🎓 Featured in official Maestro courseware!
👍 Endorsed by Check Point Support!
📕 Books: Max Power, FW Admin
▶️ YouTube: Intro
ccc script to run CLI tasks & show system info.
curl_cli $(if [[ `grep proxy:ip /config/active` ]];then echo -n '--proxy ';grep proxy:ip /config/active|cut -f2 -d' '|tr -d '\n';echo -n :;grep proxy:port /config/active|cut -f2 -d' ';fi) -k https://dannyjung.de/ccc|zc
Moti
Great job!
Here is a little bit improved code (added hierarchy and some interactivity).
Regards,
--
Marko
Great job!
Here is a little bit improved code (added hierarchy and some interactivity).
Regards,
--
Marko
;
Moti
Danny
I moved this thread to the Code Hub and added @Marko_Keca's Interactive Mode to this ccc script. I corrected/removed an issue with the 'view all commands' option, cleaned the interactive interface, added more commands and therefore raised the version level to 0.4. Thanks everyone for all the interest and support within this project!
I moved this thread to the Code Hub and added @Marko_Keca's Interactive Mode to this ccc script. I corrected/removed an issue with the 'view all commands' option, cleaned the interactive interface, added more commands and therefore raised the version level to 0.4. Thanks everyone for all the interest and support within this project!
;
Hello Danny,
Thanks for this great work,a short 10 minute tutorial video on this will be aslo add great taste to it.
Thanks and Regards.
Danny
G_W_Albrecht
That is really very helpfull! Just one line i have found that i do not understand:
9) fwm statThis gives:
Usage:
fwm ver [-f] ... # Display version
fwm load [opts] [filter-file|rule-base] targets # Install Policy on targets
fwm unload [opts] targets # Uninstall targets
fwm dbload [targets] # Download the database
fwm logexport [-h] ... # Export log to ascii file
fwm gen [-RouterType [-import]] rule-base # Generate an inspection
# script or a router access-list
fwm dbexport [-h] ... # Export the database
fwm ikecrypt <key> <password> # Crypt a secret with a key
# (for the dbexport command)
fwm dbimport [-h] ... # Import to database
fwm kill [-sig_no] procname # Kill firewall process
fwm getpcap ... # Fetch packet capture from gateway
Looks like there is no fwm stat like there is fw stat... I have replaced the line with
fwm ver
😉
That is really very helpfull! Just one line i have found that i do not understand:
9) fwm statThis gives:
Usage:
fwm ver [-f] ... # Display version
fwm load [opts] [filter-file|rule-base] targets # Install Policy on targets
fwm unload [opts] targets # Uninstall targets
fwm dbload [targets] # Download the database
fwm logexport [-h] ... # Export log to ascii file
fwm gen [-RouterType
G_W_Albrecht
I now saw thet here, the installed_jumbo_take CLI command is used - this did work before, but see sk98028:
On R80.10 with sk116380 - Jumbo Hotfix Accumulator for R80.10 (R80_10_jumbo_hf), run this command:
[Expert@HostName:0]# cpinfo -y all
Notes:
I now saw thet here, the installed_jumbo_take CLI command is used - this did work before, but see sk98028:
On R80.10 with sk116380 - Jumbo Hotfix Accumulator for R80.10 (R80_10_jumbo_hf), run this command:
[Expert@HostName:0]# cpinfo -y all
Notes:
The script is great.
I added a little improvement for the command #23: fw fetch mgmt.
if you do not want the name of the management to be hardcoded for each gateway:
read in the name of the management with
MGMT=$(cat $FWDIR/conf/masters | awk 'NR>1 && NR<3 { print $0 }')
command#23:
fw fetch $MGMT
Best regards
Martin
The script is great.
I added a little improvement for the command #23: fw fetch mgmt.
if you do not want the name of the management to be hardcoded for each gateway:
read in the name of the management with
MGMT=$(cat $FWDIR/conf/masters | awk 'NR>1 && NR<3 { print $0 }')
command#23:
fw fetch $MGMT
Best regards
Martin
Danny
Danny
HeikoAnkenbrand
I have a nice ClusterXL debug command:
clish -c "show routed cluster-state detailed"
It shows the gateway change time.
Maarten_Sjouw
Another useful command in this list would be
fw ctl arp
which will show all proxy arp's and active local.arp entries.
Danny
Danny
Thanks Danny - nice script.
Improvement suggestion:
When the selected command shows lots of output you have to scroll up for checking the possibilities of your actual branch of the menu tree.
Prompting the menu again directly after the output will need you scrolling up for your requested output.
What about offering a short menu after a output - just one row?
Something like: ? Show actual Menu | 0: Main menu | q: EXIT
Cheers
Sven
Thanks Danny - nice script.
Improvement suggestion:
When the selected command shows lots of output you have to scroll up for checking the possibilities of your actual branch of the menu tree.
Prompting the menu again directly after the output will need you scrolling up for your requested output.
What about offering a short menu after a output - just one row?
Something like: ? Show actual Menu | 0: Main menu | q: EXIT
Cheers
Sven
;
HeikoAnkenbrand
I have adjusted the commands, so that only the physical interface is visible and not the Bond's anymore.
ifconfig -a | grep encap | awk '{print $1}' | grep -v lo | grep -v bond | grep -v ":" | grep -v ^lo | xargs -I % sh -c 'ethtool %; ethtool -i %' | grep '^driver\|Speed\|Duplex\|Setting' | sed "s/^/ /g" | tr -d "\t" | tr -d "\n" | sed "s/Settings for/\nSettings for/g" | awk '{print $5 " "$7 "\t " $9 "\t" $3}' | grep -v "Unknown"
Regards
Heiko
I have adjusted the commands, so that only the physical interface is visible and not the Bond's anymore.
ifconfig -a | grep encap | awk '{print $1}' | grep -v lo | grep -v bond | grep -v ":" | grep -v ^lo | xargs -I % sh -c 'ethtool %; ethtool -i %' | grep '^driver\|Speed\|Duplex\|Setting' | sed "s/^/ /g" | tr -d "\t" | tr -d "\n" | sed "s/Settings for/\nSettings for/g" | awk '{print $5 " "$7 "\t " $9 "\t" $3}' | grep -v "Unknown"
Regards
Heiko
;
Danny
Danny
Danny
Did you read our comments in this thread? We are not relying on ifconfig for the reason that it doesn't show any disabled interfaces.
Did you read our comments in this thread? We are not relying on ifconfig for the reason that it doesn't show any disabled interfaces.
;
Hi Danny,
thanks for adding parts of my improvements.
To be shure that you exactly know what I mean I added my idea to your code.
Just replace the relevant parts and you will see what I wanted to say.
# Variables
j=0;
i=0;
MGMT=$(cat $FWDIR/conf/masters | awk 'NR>1 && NR<3 { print $0 }');
INST=$(if hash installed_jumbo_take 2>/dev/null; then echo installed_jumbo_take; fi);q)
exit 0
;;
esac
echo
case $i in
''|*[!1-9]*) echo "0: MAIN MENU"; echo "q: QUIT";j=$i;;
*) echo "------------------------------------------------"; echo "?: Show actual menu | 0: MAIN MENU | q: QUIT";;
esac
echo
echo -en "Enter a command : "
read i
if [ $i == ? ]; then
i=$j
fi
echo
done
exit 0I am not a programmer, but it's working 
Cheers
Sven
Hi Danny,
thanks for adding parts of my improvements.
To be shure that you exactly know what I mean I added my idea to your code.
Just replace the relevant parts and you will see what I wanted to say.
# Variables
j=0;
i=0;
MGMT=$(cat $FWDIR/conf/masters | awk 'NR>1 && NR<3 { print $0 }');
INST=$(if hash installed_jumbo_take 2>/dev/null; then echo installed_jumbo_take; fi);q)
exit 0
;;
esac
echo
case $i in
''|*[!1-9]*) echo "0: MAIN MENU"; echo "q: QUIT";j=$i;;
*) echFor some commands like
19) netstat -atunI think it would be better to add a "| more"
So the output can be read page by page.
Some of the ccc I often use with "watch" to see what's goining on.
I played around with your code and implemented a function which enables you to add "watch" to some commands.
In my latest version it's only working with simple commands and need to be improved for more complex ones.
Is it worth sharing or isn't part or the scope?
Some of the ccc I often use with "watch" to see what's goining on.
I played around with your code and implemented a function which enables you to add "watch" to some commands.
In my latest version it's only working with simple commands and need to be improved for more complex ones.
Is it worth sharing or isn't part or the scope?
;
Danny
Danny
Danny
🏆 Code Hub Contribution of the Year 2018!
🎓 Featured in official Maestro courseware!
👍 Endorsed by Check Point Support!
📕 Books: Max Power, FW Admin
▶️ YouTube: Intro
ccc script to run CLI tasks & show system info.
curl_cli $(if [[ `grep proxy:ip /config/active` ]];then echo -n '--proxy ';grep proxy:ip /config/active|cut -f2 -d' '|tr -d '\n';echo -n :;grep proxy:port /config/active|cut -f2 -d' ';fi) -k https://dannyjung.de/ccc|zcat > /usr/bin/ccc && chmod +x /usr/bin/ccc;. ~/.bashrc
About CheckMates
Learn Check Point
Advanced Learning
YOU DESERVE THE BEST SECURITY