Easy Debug - ONELINER

[HeikoAnkenbrand]

This oneliner will do the work for you.
Use this onliner to start easy a debug without entering all debug commands by hand.

echo 'clear; echo -n "Input debug filter: "; read dbfilter; function ctrl_c { fw ctl debug 0; rm /tmp/vd; exit 0;}; trap ctrl_c INT; fw ctl debug -buf 20480; fw ctl debug $dbfilter;echo -e "\e[7m"; echo " Stop VPN debug with CTRL-C "; echo -e "\e[0m"; fw ctl kdebug -f -T | tee /var/log/edebug.log; sleep 100000000;' > /tmp/vd; chmod 770 /tmp/vd; /tmp/vd

What happens when you execute! It is a small script that executes the following commands:

fw ctl debug -buf 8192
fw ctl debug [entered debug filter]
fw ctl kdebug -f
       [Wait until CTRL+C is pressed]
fw ctl debug 0

First you will be asked about the debug filters! Here you can enter the kernel debug flag (see picture below).

The example is comparable to "fw ctl zdebug drop". But with the advantage that the debug buffer is 8196K large. All debug flags described in this PDF (Kernel Debug Flags R80.10 ,  Kernel Debug Flags R77,  R80.40 Kernel Debug Syntax) can be used here.

If the firewall issue has occurred, you only need to stop the oneliner via CTRL-C and the debug will be stopped. All debug filters are cleared.

Furthermore the output of the debug is stored in the file /var/log/edebug.log for further analysis.

Attention:
If you turn on debugging, this will affect the performance of the firewall.

These are the basic kernel FW debug parameters:

Debugging Modules

Module	Explanation
Kiss	Kernel I/s (Kernel Infrastructure)
Kissflow	Kernel I/s communication with other modules and policy enforcement
fw	Firewall, the most common module
h323	H323 VoIP traffic module
Multik	CoreXL module
uc	UserCheck module
dlpk	Data Loss Prevention module
cluster	ClusterXL module
CPAS	Check Point Active Streaming (unlike PSL)
cmi_loader	Signature loading for Security blades
NRB	Next Rule Base, security blades rulebase
SGEN	Security Gateway Enforcement (stateful)
RAD_KERNEL	Very important I/S, DNS resolving, string matching, md5sum check against database and 3rd party, resource categorization
WS	Web Security module - HTTP inspection by all blades
APPI	Application Control module
CI	Content Inspection (Anti-Virus, Anti-Bot )
RTM	Real Time Monitoring
VPN	VPN module
SFT	Secure File Type
UP	Unified Policy module

Common traffic flags in fw module

Module	Explanation
drop	the connection that was dropped, the function in the firewall that dropped it and the reason
conn	information from the connections table (everything that can be seen with this command #fw tab -t 8158) . Direction of packets in connections, source/destination of IP and ports, service type, handler, timeout, the rule that this packet is matched on, ETC
ld	this flag refers to the kernel dynamic tables infrastructure. It reads and write everything that is written to any kernel table. Adding this flag to the debug syntax may cause the machine high CPU and can even cause the machine to hang. Check load before performing this debug on production environment.
nat	basic NAT information
xlate	the firewall NAT infrastructure - basic NAT information + NAT cache
xltrc	NAT additional information, print NAT rulebase information and more information from the NAT kernel table (fwx_alloc)
packet	information on actions performed on packet - like accept, drop, fragment, inspection
packval	advanced information of the packet's header. stateless verifications - sequences, fragments, translations and other header changes and verifications.
vm	shows actions of all the virtual chains that can be seen with the command: # fw ctl chain on the traffic that go through the chain handle function fw_filter_chain
tcpstr	TCP streaming mechanism, organize TCP packets by order and checks protocol messages. debug the PSL I/S. (passive streaming layer)
chain	chain cookie information, chain modules
chainfwd	chain forwarding - related to fwha_perform_chain_forwarding global kernel variable (clusterXL only)
cookie	the kernel saves information and holds connections for inspection, this flag will show virtual de-fragmentation and cookie issues (cookies in the data structure holding the packets)
hold	holding mechanism and all packets being held / released

Common IPS flags in fw module

Module	Explanation
aspii	Accelerated Stateful Protocol Inspection Infrastructure (INSPECT streaming)
spii	Stateful Protocol Inspection Infrastructure
cmi	Context Management Infrastructure - IPS signature manager
advp	IPS and Application Control signatures, contexts and patterns
synatk	IPS protection "SYN Attack" (SYNDefender)

[Joerg_B]

Nice Solution.