Dynamic Routing Debug Tool

[TurgutKaplanogl]

BGP, OSPF and PIM Troubleshooting – Simplified & Standardized

Troubleshooting dynamic routing issues on Check Point gateways often requires multiple debug commands, careful sequencing, and consistent log collection.
To simplify this process and reduce operational mistakes, I built a menu-driven Dynamic Routing Debug Tool that standardizes BGP, OSPF, and PIM / Multicast debugging workflows.

Note: One-time before running the script

Expert mode: chmod +x cp_dynamic_routing_debug.sh

Expert mode: dos2unix cp_dynamic_routing_debug.sh

[the_rock]

Excellent!

From the lab:

[Expert@CP-GW:0]# ./cp_dynamic_routing_debug.sh
========================================
Check Point Dynamic Routing Debug Tool
========================================
1) BGP & RouteD Debug
2) OSPF & RouteD Debug
3) PIM and Multicast Debug
4) cpinfo
0) Exit
========================================
Select option: 1
Enter BGP PEER IP :