strongSwan remote access vpn guide - Quantum spark

[FerPr0c03]

Hello, Does anyone have any remote access vpn configuration guides using the StrongSwan client for locally managed Quantum spark r81.10.05?

I read this article, but do you use P12 certificates for both entities?

https://community.checkpoint.com/t5/Remote-Access-VPN/C2S-Libreswan-3-23-Roadwarrior-and-R80-30-work...

SMB Gateways (Spark) Quantum Spark (SMB) remote-access 

[G_W_Albrecht]

Good article ! SMB has only https://sc1.checkpoint.com/documents/SMB_R81.10.05/AdminGuides/Locally_Managed/EN/Content/Topics/Con.... This also should be valid: https://sc1.checkpoint.com/documents/R81.10/WebAdminGuides/EN/CP_R81.10_RemoteAccessVPN_AdminGuide/T...

[FerPr0c03]

Hello mate, thanks for your reply 

I tried everything related to the guide, as well as touching some parameters of strongswan but it was not successful.

As far as I can see, ike phase 1 is completed but the next phase is not. Any suggestions? I add the strongswan and firewall configuration and logs.

[PhoneBoy]

This probably needs to be debugged.
See: https://support.checkpoint.com/results/sk/sk180488 (much of it should apply on SMB as well).
It may be a good idea to open a TAC case also: https://help.checkpoint.com