I have a checkpoint quantum spark 1590 locally managed firewall. I am setting up VLAN since number of devices has been approx. 500 and only one physical network is laid in the office.
What I understood from the documentation that multiple VLANs can be setup on same physical port lets say port 8. So I created a new VLAN over Port 8 and set the following
vlan id as 101
local network port as LAN 8
Assigned to as Separate Network
Ipv4 address as 192.168.10.1
Subnet as 255.255.255.0
Now I connected a laptop with LAN 8 with static IP as 192.168.10.2 with subnet mask as 255.255.255.0. But the network is not discoverable and no internet access is being showed. (Firewall has been set as Standard)
Can any one please guide me that can multiple VLANs be setup on single physical port ...? and what I am doing wrong here...
Thanks in advance 🙂