Hi,
We are changing our ISP to AT&T and told them we do not need a firewall or wireless capability. (We have both already)
So they sent us a CheckPoint 1500 that has firewall and wireless capabilities.
With our current ISP configuration we have a M390 firebox with full Security Suite that connects into a Cisco 4321(current ISP equipment). The Cisco 4321 connects into a ACCEDIAN unit (current ISP equipment). The ACCEDIAN unit connects into the CIENA on our wall where the demark is located.
I think I know how to turn off the firewall and the wireless functions on the CheckPoint 1500. What I don't know (and so far, no one at AT&T can tell me) how do I (and where do I) connect my current firebox into the Checkpoint 1500 so we will have internet connections.
When I do a tracert on my current system, It hits the layer 3 switch first, then the M390 Firebox, the Cisco 4321 with ISP's gateway, and then the internet. This configuration has worked great and we really don't want to change it. (And in our AT&T meeting, we were told we did not have to change it)
So far, I have the CheckPoint on another circuit on the CIENA and the WAN connection. Using the static information and the gateway given to us by AT&T, the Wan is connected.
(By the way, I have my firebox set up with another external connection with the correct cidr notation and the gateway that AT&T supplied).
Just that final piece of connecting our firebox's new external connection with the CheckPoint 1500 is all we need. We then can bypass the current ISP's equipment and conclude our testing before we formally discharge the current ISP.
Thank you advance for your suggestions and expert advice.
FD-23