Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
K_montalvo
Advisor

Quantum Spark 1600 Site to Site VPN Setup

Jump to solution

Hello my friends,

I would like to setup a site to site VPN between (2) Quantum Spark 1600 SMB Gateways. Both have dedicated WAN static IP address. If you guys have any documentation or tutorial kindly share.

I tried to set it up following the gateway wizard and lose the MGMT via Web to the Gateway. However internet and internal traffic keep working, i had to factory reset and reconfigure that gateway to recover MGMT via WEB. The mystery is that from Mobile Management APP (Watch Tower) keep always working. I just want to be sure how to you guys recommend to set it up or identified if im doing something wrong. Any information is very welcome!

Thanks!

0 Kudos
1 Solution

Accepted Solutions
G_W_Albrecht
Legend
Legend

This is covered in Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.35 Locally Managed Administration Guide !

CCSE CCTE SMB Specialist

View solution in original post

(1)
5 Replies
G_W_Albrecht
Legend
Legend

This is covered in Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.35 Locally Managed Administration Guide !

CCSE CCTE SMB Specialist
(1)
K_montalvo
Advisor

Thanks @G_W_Albrecht i will check that out!!!

0 Kudos
the_rock
Champion
Champion
K_montalvo
Advisor

Yeah buddy i will try that soon many thanks to both of you brothers!

the_rock
Champion
Champion

You know what they say...we are brothers from different mothers ; - )