Quantum Spark 1600 Site to Site VPN Setup

[K_montalvo]

Hello my friends,

I would like to setup a site to site VPN between (2) Quantum Spark 1600 SMB Gateways. Both have dedicated WAN static IP address. If you guys have any documentation or tutorial kindly share.

I tried to set it up following the gateway wizard and lose the MGMT via Web to the Gateway. However internet and internal traffic keep working, i had to factory reset and reconfigure that gateway to recover MGMT via WEB. The mystery is that from Mobile Management APP (Watch Tower) keep always working. I just want to be sure how to you guys recommend to set it up or identified if im doing something wrong. Any information is very welcome!

Thanks!

[G_W_Albrecht · Accepted solution]

This is covered in Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.35 Locally Managed Administration Guide !

[K_montalvo]

Thanks @G_W_Albrecht i will check that out!!!

[the_rock]

Its here brother as @G_W_Albrecht  mentioned.

Andy

https://sc1.checkpoint.com/documents/SMB_R80.20.35/AdminGuides/Locally_Managed/EN/Topics/Configuring...

[K_montalvo]

Yeah buddy i will try that soon many thanks to both of you brothers!

[the_rock]

You know what they say...we are brothers from different mothers ; - )

[Hna9817]

Gi G_W_Albrecht would like to know vti route based vpn can work in checkpoint quantum spark 1600 and 1800.. If can, can you share the documentation about that.thx.

[G_W_Albrecht]

That is  https://sc1.checkpoint.com/documents/SMB_R81.10.X/Dynamic_Routing/EN/Content/Topics/Introduction.htm