Check Point 750 Speed issue

[Gary_Lai]

Dear Sir,

Model:CP750

Blade: Firewall , Application & URL filtering , User Awareness, Remote Access

Subscribed Internet Rate: 500Mbps Download, 100Mbps Upload

But using network speed, the speed is between 30~90Mbps

I check if the CPU and memory are normal. Does the CP750 have a similar cpview command to check interface traffic?

I suspect that it is not a problem with CP.

[Timothy_Hall]

Is your WAN NIC port actually linked up at 1Gbps or 100Mbps?  Are there network errors being encountered (netstat -ni)? What code level are you running (fw ver)?

The 750 is a very limited box, I highly doubt you'll be able to push anything approaching 500Mbps through it in the real world, regardless of your configuration.

[Gary_Lai]

Dear Pearl ,

You are right. After switching to a 1000M computer, the speed returned to normal, but after turning on the UTM function, the speed was only 27M. I think the data sheet should be able to reach 200M.

[G_W_Albrecht]

I would let TAC check this...