1550 sub vlan interface

[nflnetwork29]

Does anyone know if the 1550 model supports the creation of Sub VLAN interfaces (SVI) on the physical interfaces?

thank you

[Vladimir]

It should, especially since it was supported on the older, 1400 series:

[Danh]

If by SVI you mean the ability to define a few VLANs on the same physical port and use IP routing between them, then yes it is supported on the 1500 series.

[patnaik1010]

Hello There,

I have Model 1550 appliance  and I have two network segments and one wan connection. Is it possible to configure NAT between two LAN network segments. 

LAN Network 1 - 192.168.100.x /24 

LAN Network 2 - 10.7.100.x /24  - Port 5 from LAN port configured with IP address

WAN Network - 192.168.0.x /24 -  Configured on WAN Port 

If any configuration document available to configure intervlan routing & sub vlan interfaces ,please share for reference. 

Thanks 

Srinivas Patnaik

[G_W_Albrecht]

Here: 1500 Appliance Series R80.20 Locally Managed Administration Guide p.50ff - Configuring the Local Network