Checkpoint Remote Access VPN - support for Windows 11 24H2 (build 26100)

[mbesen]

Hello,

I tried to install Remote Access VPN, latest available version (E88.40) on laptop running Windows 11 Enterprise 24H2, build 26100.

Build 26100 is an upcoming 24H2 release that is already available for couple of months in Insider programme, and is released for general availability for ARM computers, with imminent release to Pro and Enterprise SKUs.

So, after installing 24H2 on company laptop and setting up Remote Access VPN, said VPN connects to VPN gateway server for couple of seconds and then it disconnects. Laptop's network adapter stops working too unless I reset it via Settings app.

I know there is no official support for 24H2 yet from Checkpoint, but usually there was installation block that prevented installing Remote Access VPN on unsupported build versions. This time this didn't happen so I wanted to know is CheckPoint aware of this issue, and if needed, I can provide additional logs to help narrow down the root cause test fix, if possible.

Thank you, and kind regards,

Mario

EDIT: I couldn't find Remote Access VPN subforum, didn't notice it's under Quantum now, so if you could be kind enough to move it there I'd appreciate it!

[Chris_Atkinson]

Per sk117536 (Client OS support) we aim to offer early availability clients within 3 weeks of OS GA and to announce GA within 2 months of OS GA, however generally this occurs sooner. See also sk115192 for OS support timeline.

Please otherwise engage with TAC and your SE on this issue if it is a non-ARM environment. 
Note ARM support is currently limited to select client types only per sk170777.

[mbesen]

Hi Chris,

thanks for your update, I see this didn't get fixed even with latest Remote Access VPN version so I'll wait for official fix to get out.

Kind regards,

Mario

[Chris_Atkinson]

E88.41 and above introduced EA support for Win1 11 24H2 to my knowledge, for reference latest version is E88.60

For ARM based systems please consult with your local office.

[the_rock · Accepted solution]

Thats right. Here is the official sk about it. We actually have a case with TAC T3 about it.

Andy

https://support.checkpoint.com/results/sk/sk182749

[mbesen]

Thank you all!

This is x86, not ARM, and I see that the case is already opened and we are hit with it too.

Kind regards,

Mario

[G_W_Albrecht]

Did you try https://support.checkpoint.com/results/sk/sk182749 yet ?

[mbesen]

Hi,

yeah, I tried applying this on client and it didn't help sadly.

KR,

Mario

[the_rock]

So you tried modifying trac.defaults on the client as indicated on the bottom of the sk and that did not work?

Andy

[mbesen]

Yep, edited trac.defaults, confirmed it was saved, restarted Remote Access VPN service, and it still didn't work.

I have reverted back to 23H2, and will wait for network team to apply this workaround server-side so we can evaluate this. Thanks!

[the_rock]

Im going to mention this to TAC as well through the case itself...just for the context, what client version?

Andy

[mbesen]

I tried doing this on E88.60, E88.50, and E88.41 (clients that ought to be compatible with 24H2).

KR,
Mario

[the_rock]

Yup, all mentioned in the sk, from E88.40-E88.70. Ironically enough, we even made change on the gateway first, installed policy and it made situation WORSE. Man, none of this is good, it will affect lots of people...

Andy

[the_rock]

Just to update, we had TAC send us updated ttm file for the gw (check the bottom section) and once we pushed the policy, seems that fixed the problem.

You may want to run this once you modify it -> vpn check_ttm $FWDIR/conf/trac_client_1.ttm

If it gives an error, run -> dos2unix trac_client_1.ttm and then vpn command again

Install policy -> test

If cluster, make sure you modify file on both members.

Andy

[the_rock]

@mbesen 

Below is what you should see if modification is right.

Andy

[Expert@R82:0]# vpn check_ttm /opt/CPsuite-R82/fw1/conf/trac_client_1.ttm

Summary for the file: trac_client_1.ttm
result: the file passed the check without any problems

[Expert@R82:0]#

[Chris_Atkinson]

Please open a case with support or in case it is already open then please share the SR number in private.

[Lau]

Hi

https://support.checkpoint.com/results/sk/sk182749 solved the issue partially for me. Thanks!

Does anyone have any idea if this is solvable in a similar way for clients using SNX in network mode? They are experiencing the same symptoms but the solution did nothing as I'm guessing trac_client_1.ttm does not affect that client type.

/Lau

[the_rock]

Thats right, does not affect snx. Maybe check with TAC if there is another modification needed?

Andy

[Lau]

Already have a case with TAC and working through the normal steps. Was hoping someone had already found a solution for a quick fix.

/Lau

[the_rock]

Lets see if someone may know.

Andy

[kenn_checkpoint]

Hi

We are experiencing this as well - upgraded 3 windows 11 pcs to 24H2 and now checkpoint vpn no longer works on them. They establish connection but after a few seconds networks connection is disrupted and vpn disconnects.

I have tried both 88.40 and 88.60 versions - same result.

i got a bit lost in this thread, is there a way to fix this on the clients or we waiting for checkpoint to release new version?

thanks in advance

/Kenn

[Chris_Atkinson]

Currently there is not a GA client for this Windows version listed in sk115192.

If the solution in sk182749 does not work for you please contact support.

[Bruno_Ramos]

Hi Lau,
I'm facing a similar issues. Did you manage to resolve your issue?

Thanks
BR

[the_rock]

Did you follow instructions from the sk? I attached how the file needs to be edited, all you have to do is copy it and install policy, thats it, No need to run vpn check_ttm, as I verified it myself.

Andy

[Bruno_Ramos]

Hi,
Thank your the fast reply.
I did follow the sk instructions and for endpoint clients works perfectly but now I see issue with SNX as well... It should be related but I saw Lau with a similar issue and a TAC ticket so I asked 🙂

Thanks

BR

[the_rock]

My apologies, sorry, did not realize thats what you meant. For that, I would double check with TAC.

Andy

[Lau]

Still working with TAC on the issue. They are unfortunately still not able to understand the issue and just keep asking me to upgrade/update the actual firewalls. Already running R81.20 JHf Take 89.

Might be helpful if you open another case on the same issue.

[the_rock]

I agree 100%. I even checked jumbo 90 notes and there is nothing about snx there at all. I feel it would be totally pointless to even consider jumbo 90 in your case, as Im positive it would not do anything for this issue.

Did you check below steps?

Andy

https://support.checkpoint.com/results/sk/sk103572

[Lau]

Yepp. sk103572 completed and in the hands of the support technician.

[the_rock]

Are you okay posting debugs here? I would like to review to see if we can help further. Or message me directly with some details that may help.

Let me know.

Andy