Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Shahar_Grober
Advisor

2 Office mode DHCP pools

Hi,

 

is there a way to assign different users groups connecting to the same gateway with 2 different DHCP Office mode pools?

 

Group 1  --> DHCP office mode pool 1

Group 2 --> DHCP office mode Pool 2 

0 Kudos
5 Replies
Jerry
Leader
Leader

yes and no, all depends how advanced you are with the Gaia 🙂

Jerry
0 Kudos
Shahar_Grober
Advisor

any documentation/SK about it?
0 Kudos
EdsonF96
Participant

Yes, you have to configure the $FWDIR/conf/ipassignment.conf  on the gateway . Follow sk33422 😄

0 Kudos
Erik_perez
Participant

Hi,

I found this sk I think it will help you for what you want to do, because graphically you only accept a single network object to configure the office mode.

https://sc1.checkpoint.com/documents/R80.10/WebAdminGuides/EN/CP_R80.10_RemoteAccessVPN_AdminGuide/h...

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

greetings

0 Kudos
Hrvoje_Brlek
Contributor

Can we use the ipassignment.conf together with a specific DHCP server?

For example, I have set a specific LDAP group in ipassignment.conf to receive an IP address in range of 10.10.1.1-10.10.1.253, but also have a user (that is a member of the specific LDAP group) that is statically assigned on the Micrososft DHCP server to receive an IP address 10.10.1.222 (inside the above mentioned IP pool), will he receive this IP address?

0 Kudos