Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
emichalitsis
Explorer

Gateway Cluster Properties Platform

Hello,

 

I have a question for you:

 

I would like to ask you what are the impacts if by mistake we choose wrong Hardware and Version settings in Platform area?

I have a Standalone Cluster Full HA with two Checkpoint Appliances 5000 Series Hardware. 

By mistake i choose Hardware "Open Server" and the Version was correct "R80.40"

But i had some serious problems regarding connectivity, delays in networks, etc 

 

After a few hours later i realized that these settings are wrong and i changed with the correct ones (see attached pictures) and the problems disappeared!

I m not sure if that was the problem but i did nothing else rather than these changes, so i persume that indeed that was the problem!

 

Any idea about this?

0 Kudos
3 Replies
the_rock
Legend
Legend

I am curious to see what others say, but I had seen people make that mistake many times before and it was never an issue. My educated guess is that it may had been just a coincidence, but hard to say 100%. Can you pull any logs from the time of the issue? Just look in /var/log/messages.x files

Andy

0 Kudos
Daniel_Szydelko
Advisor
Advisor

I do confirm. I newer saw it as a root cause of any issues.

S_E_
Advisor

hi,

same here. Never saw an issue with standard appliances.

https://community.checkpoint.com/t5/Management/General-Properties-Hardware-Platform-type/m-p/100549#...

Regards

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events