Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
ydarnik
Explorer

Snapshot delete issue

Hi,

 

Faced a problem with deleting snapshot. When trying to delete a snapshot, the following error is displayed: "An error occurred while applying action to several members. Please check the status bar history." 

This is Maestro, R81.10 (take 87)
When displaying show snapshots it shows that only 2 and 4 devices have snapshots data.

[Global] DMZ-PUBLIC-CL1-ch01-01> show snapshots 
1_01:
Restore points:
---------------
T87
AutoSnapShot_R80_30_47
 
Creation of an additional restore point will need 17.600G
Amount of space available for restore points is 7.74G
 
1_02:
Creation of an additional restore point will need 8.992G
Amount of space available for restore points is 43.77G
 
2_01:
Restore points:
---------------
T87
AutoSnapShot_R80_30_47
 
Creation of an additional restore point will need 17.248G
Amount of space available for restore points is 8.02G
 
2_02:
Creation of an additional restore point will need 8.896G
Amount of space available for restore points is 43.77G

 

 

How to fix this problem?

0 Kudos
3 Replies
Tom_Kendrick
Employee
Employee

Hi, if you look in the upgrade guide:

https://sc1.checkpoint.com/documents/R81.20/WebAdminGuides/EN/CP_R81.20_Maestro_AdminGuide/Content/T...

 

You will see an example of how to revert a snapshot. This is from an upgrade (so discusses how to revert), but the logic of where and what shell you use is the same - just change the command to the activity you want - like delete.  Please ensure you read the guide, to ensure it covers your use case enough to follow the steps, but it should be a good starting point.

roll-back-snap.png

 

 

 

 

 

 

 

 

 

 

Tom

0 Kudos
the_rock
Legend
Legend

Can you try from clish as below?

Andy

[Expert@CP-STANDALONE-backup:0]# clish
CP-STANDALONE-backup> delete snap
CP-STANDALONE-backup> delete snapshot
CP-STANDALONE-backup> delete snapshot
Delete snapshot.
CP-STANDALONE-backup> delete snapshot

0 Kudos
JH_Ranger
Participant

I think this was fixed in one of the JHF (Take113). It seems it was an issue not just for snapshots, but for changing passwords, and applying other configurations from the GAIA portal. I have had to apply a few configurations locally on each SGM until I've applied the Take.

 

Take 113

PRJ-47865,

ACCHA-3317

Scalable Platforms

Accessing the SMO WebUI and performing configuration changes may fail with the "Error in acquiring buffer of member info (-1)" error."

0 Kudos