Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
HeikoAnkenbrand
Champion
Champion

Maestro R81.10 - Interface Distribution Issue

I have the issue in Maestro under R81.10 that I can not change the distribution of the interface in the security group.
The Distribution Mode is assigned to Auto-Topology (is not working in the General Mode). So this should be possible, right?

Here is a picture with the show command:
maestro_dist_issue.png

I have the same problem when I set the Distribution Mode for an interface:
maestro_dist_issue_2.png


➜ CCSM Elite, CCME, CCTE
0 Kudos
8 Replies
Jochen_Hoechner
Employee
Employee

Hi, 

this interface is assigned to the security group and has no VLAN configured? 
did you try to check 'show  distribution interface' then ? or [tab] key? 

Thanks
Jochen

0 Kudos
HeikoAnkenbrand
Champion
Champion

>>>this interface is assigned to the security group and has no VLAN configured?
yes
>>>did you try to check 'show distribution interface' then ? or [tab] key?
The [tab] key does not work and does not display an interface.


➜ CCSM Elite, CCME, CCTE
Lari_Luoma
Ambassador
Ambassador

@HeikoAnkenbrand 
I'm checking this internally. I tested in the lab and got the same error. Will get back to you.

0 Kudos
Jochen_Hoechner
Employee
Employee

Hi, I got no issues with R81.10 JHF Take 30. 

[Global] FW-XXXXX > show distribution interface bond1.104 configuration
1_01:
policy-internal

1_02:
policy-internal

1_03:
policy-internal

1_04:
policy-internal

0 Kudos
Lari_Luoma
Ambassador
Ambassador

Can you confirm if you had policy installed and the interfaces you tried to configured were in the topology? It appears that this might be the issue.

0 Kudos
Lari_Luoma
Ambassador
Ambassador

I can confirm that the policy installation fixed the issue for us.

0 Kudos
Jochen_Hoechner
Employee
Employee

Hi Lari, I confirm, system has a security policy. 

It is logical: As long as the machine does not have a policy or initial policy, interfaces do not have a Topology. 
As long as interfaces do not have a topology, their topology is 'undefined'.

The 'good old' asg if command will also not display interfaces as long as you do not have a policy.

Best
Jochen

Satya2021
Contributor

[Global] HO-GW-ch01-02> show distribution verification verbose
Test: Configuration: Local SGM: Orchestrator 1: Orchestrator 2: Result:
Mode per-port per-port per-port per-port Passed
L4 Mode on on on on Passed
Matrix Size 512 512 512 512 Passed
eth1-06 policy-external-l4 policy-external-l4 external-l4 -- Passed
eth1-07 policy-external-l4 policy-external-l4 external-l4 -- Passed
eth2-07 policy-external-l4 policy-external-l4 -- external-l4 Passed
eth2-06 policy-external-l4 policy-external-l4 -- external-l4 Passed

Matrix:
2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2

Matrix verification passed successfully

Verification passed successfully

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

 
Upcoming Maestro Events