Is below SCADA protocol supported by Checkpoint ? I have identified few of them are supported but need confirmation for rest all protocol.
| Sr. No |
Protocols List |
Compliance |
| 1 |
Power System Automation Protocols: |
|
| 1.1 |
▪ IEC 60870-5 |
Yes- we support IEC 60870-6 (ICCP) |
| 1.2 |
▪ IEC 61850 |
Yes |
| 1.3 |
▪ ICCP |
Yes - Refer first point |
| 1.4 |
▪ DNP-3 |
Yes |
| 1.5 |
▪ Modbus |
Yes |
| 2 |
• Metering Protocols |
|
| 2.1 |
▪ DLMS/IEC 62056 |
Yes |
| 2.2 |
▪ Mbus |
|
| 2.3 |
▪ ZigBee |
Yes |
| 2.4 |
▪ PLC/RF Mesh |
Yes |
| 3 |
• Smart Grid /IIoT Protocols |
|
| 3.1 |
▪ OSFP |
|
| 3.2 |
▪ OCPP |
|
| 3.3 |
▪ Open ADR |
|
| 3.4 |
▪ MQTT |
Yes |
| 3.5 |
▪ IEEE 2030.7 |
|
| 3.6 |
▪ IEC 63110 |
|
| 3.7 |
▪ CIM IEC 61968/IEC 61970 |
|
| 4 |
• Others |
|
| 4.1 |
▪ FTP / FTPS |
Yes |
| 4.2 |
▪ HTTP |
Yes |
| 4.3 |
▪ XMPP |
|
| 4.4 |
▪ OPC/OPC-UA |
Yes |
| 4.5 |
▪ SOAP |
|
Regards / Sunil Mishra
