SCADA Protocol

[Sunil_Mishra]

Is below SCADA protocol supported by Checkpoint ? I have identified few of them are supported but need confirmation for rest all protocol.

Sr. No	Protocols List	Compliance
1	Power System Automation Protocols:
1.1	▪ IEC 60870-5	Yes- we support IEC 60870-6 (ICCP)
1.2	▪ IEC 61850	Yes
1.3	▪ ICCP	Yes - Refer first point
1.4	▪ DNP-3	Yes
1.5	▪ Modbus	Yes
2	• Metering Protocols
2.1	▪ DLMS/IEC 62056	Yes
2.2	▪ Mbus
2.3	▪ ZigBee	Yes
2.4	▪ PLC/RF Mesh	Yes
3	• Smart Grid /IIoT Protocols
3.1	▪ OSFP
3.2	▪ OCPP
3.3	▪ Open ADR
3.4	▪ MQTT	Yes
3.5	▪ IEEE 2030.7
3.6	▪ IEC 63110
3.7	▪ CIM IEC 61968/IEC 61970
4	• Others
4.1	▪ FTP / FTPS	Yes
4.2	▪ HTTP	Yes
4.3	▪ XMPP
4.4	▪ OPC/OPC-UA	Yes
4.5	▪ SOAP

Regards / Sunil Mishra

[Chris_Atkinson]

Reach out to Shlomi & Mati by email for anything you can't readily find listed in the AppWiki.