Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
kobilevi
Participant

smartconsole 80.30 is crashing

hello

i install the last version of smartconsole on my computer, my gaia server is installed on vmwork station

after the installation and compalte the wizard in the web interface the system will reboted and  comes on..

 

but i lost the connection to the server -

the web interface still up, but i cannot ping to the server from my computer - 

smartconsole is too dont work 

ping to my computer from the server is fine..

 

someone know what is the problem?

 

 

 

0 Kudos
7 Replies
kb1
Collaborator

are you using gns3? if so which version?
0 Kudos
kobilevi
Participant

no
gaia- virtual server -vmwork station
smartconsole - my host -win 10
0 Kudos
PhoneBoy
Admin
Admin

Unfortunately, you haven't provided enough details that we can make any suggestions about how you can resolve this.
Please provide step by step (with screenshots where appropriate) exactly how you've configured things, what you did, and the results you got.
I'd also describe the virtual environment you've created with screenshots and configured IPs.
With the VMs you're using, please describe the RAM and cores allocated to each one relevant.
0 Kudos
kobilevi
Participant

hello

in capture 1 - this is the eth0(mgt) of gaia server that config on vmwork station

in capture - this is the configuration of the vm net adapter (my host is too connect to this network)

 the setting on the vm is -

memory -4 GB

process -2

hard disk -15 G

----

ping to gaia server  i get request time out-

ping from gaia server to the host - sucssesful 

 

 

0 Kudos
Timothy_Hall
Champion
Champion

Minimum required memory for an SMS according to R80.30 release notes is 6GB, and you have 4GB allocated.  You will also need to allocate way more hard drive for the SMS VM than 15GB, I use 60GB in my lab successfully but the minimum required is supposedly 500GB.  I'd also increase from 2 to 4 cores if possible so you can use SmartEvent.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos
kobilevi
Participant

ok
after i increasing that setting the problem still occur
ram -6
hard disk 60
prosess still 2
0 Kudos
PhoneBoy
Admin
Admin

In my lab, I allocate 4 cores and 16gb of RAM to management.
This allows use of SmartEvent and is reasonably performant in a small environment.
6gb of RAM is the bare minimum.

What does the output of $FWDIR/scripts/cpm_status.sh say?

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events