- Products
- Learn
- Local User Groups
- Partners
-
More
Join Us for CPX 360
23-24 February 2021
Important certificate update to CloudGuard Controller, CME,
and Azure HA Security Gateways
How to Remediate Endpoint & VPN
Issues (in versions E81.10 or earlier)
IDC Spotlight -
Uplevel The SOC
Important! R80 and R80.10
End Of Support around the corner (May 2021)
hello
i install the last version of smartconsole on my computer, my gaia server is installed on vmwork station
after the installation and compalte the wizard in the web interface the system will reboted and comes on..
but i lost the connection to the server -
the web interface still up, but i cannot ping to the server from my computer -
smartconsole is too dont work
ping to my computer from the server is fine..
someone know what is the problem?
hello
in capture 1 - this is the eth0(mgt) of gaia server that config on vmwork station
in capture - this is the configuration of the vm net adapter (my host is too connect to this network)
the setting on the vm is -
memory -4 GB
process -2
hard disk -15 G
----
ping to gaia server i get request time out-
ping from gaia server to the host - sucssesful
Minimum required memory for an SMS according to R80.30 release notes is 6GB, and you have 4GB allocated. You will also need to allocate way more hard drive for the SMS VM than 15GB, I use 60GB in my lab successfully but the minimum required is supposedly 500GB. I'd also increase from 2 to 4 cores if possible so you can use SmartEvent.
About CheckMates
Learn Check Point
Advanced Learning
WELCOME TO THE FUTURE OF CYBER SECURITY