cp 600 high availability and hyper-v with network teaming

[ck]

hi all,

i have 2 cp600 in HA.

1 hyper-v with network teaming enabled and another hyper-v not network teamed.

virtual machine from not teamed hyper-v does not  ping another vm in teamed hyper-v.

after broked network teaming all work as aspected.

do you have experience if is possible to configure hyper-v network teaming and make it works with HA.

[PhoneBoy]

Can you provide a network diagram that explains the relationship between physical 600 appliances and Hyper-V and the expected traffic flows?
In any case, the 600 appliances are End of Support.

[ck]

hi, network diagram as requested.

[Chris_Atkinson]

To clarify your diagram further are the affected hosts on the same subnet or different?

[ck]

affected  host are on same subnet, i am considering only HA subnet. 

while i was drawing the diagram it cames in mind the onlyv vm aren't pingable, phisical host yes, so  i think it could be how teaming manage vm's mac address 

[the_rock]

As @PhoneBoy asked, network diagram would really help us help you here. Please blur out any sensitive info.

Cheers,

Andy

[ck]

network diagram as requested.

there aren't subnet specified becauase is only one.

[Chris_Atkinson]

What are the VMs that you mention?

If the hosts are on the same subnet and connected via intermediate switches this shouldn't be a firewall problem.

[ck]

in fact i'm talking about teaming configuration and not about firewall.