Peer sent wrong DN

[Moudar]

Hi

I got a route based VPN between 1575 SMB and a 6500 gateways.

On Smartconsole it looks like this:

Where the SMB that got the problem is test7

On Smartevent monitor test7 is waiting:

The problem began immediately after upgrading the SMS to take 76.

What’s odd is that the tunnel is still functioning correctly. On the other side, there’s a Cisco AP that connects to its WLC on my side without any issues!

I checked sic_info.elg on SMB I could see this log:

CLIENT; process: fw; my port: 42545; peer port: 18191; my ip addr: 192.168.7.10; peer ip addr: x.x.x.x; sic service type: EntitlementManager; fwasync state: SIC_CLIENT_GET_SICNAME; error id: 111; SIC Error for EntitlementManager: Peer sent wrong DN: CN=fw01,O=xxxx.xxxx.xxxx.xxxxxx

On 6500 cluster object the CN=fwcl

I wonder why the SMB is getting CN=fw01, where fw01 is a gateway on fwcl cluster!

How to import the correct certificate to the SMB, is it "Reinitialize Trusted communication"?

[G_W_Albrecht]

Yes, see https://sc1.checkpoint.com/documents/SMB_R81.10.X/AdminGuides_Centrally_Managed/EN/Content/Topics/Se...

[Moudar]

What should i look at? The SMB is already centrally managed?

[Lesley]

I think this is a known limitation:

SmartView Monitor

SMBGWY-2525

The SmartConsole "Device & License Information" window shows incorrect information for the Centrally Managed Quantum Spark Gateway in these scenarios: The Centrally Managed Quantum Spark Gateway is configured with a Dynamically Assigned IP Address (DAIP) There is a NAT device between the Check Point Management Server and the Centrally Managed Quantum Spark Gateway To get to this window: In SmartConsole, from the left navigation panel, click the "Gateways & Servers" view. Select the Quantum Spark Gateway object. In the bottom pane, click the "Summary" tab. At the bottom, click the link "Device & License Information".

[the_rock]

Have you tried rebooting that SMB gateway?

Andy

[Moudar]

yes, same !