Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Copper

Access Server from Branch office using Remote Access

Jump to solution

VPN Community type: Star

HQ1- Center gateway/ Check Point 2200/ R80.30

Branch1- Satellite gateway/ Check Point 1100/ R77.20

VPN Routing- To center and to other satellites through center

Branch1 Policy Rule- RA range added to access the server over port 8069

 

VPN client was able to connect to HQ1 gateway, can access services inside the HQ1 office but unable to reach the server in Branch1 office.

0 Kudos
1 Solution

Accepted Solutions
Highlighted
On the HQ1 gateway object go into the Network Management > VPN Domain and there click the Set domain for Remote Access Community.
From the list choose the RemoteAccess Community click Set now choose a group that contains the networks in HQ1 and the network in the Branch1.
Click ok 3 times and push policy to the HQ1 gateway
Regards, Maarten

View solution in original post

2 Replies
Highlighted
On the HQ1 gateway object go into the Network Management > VPN Domain and there click the Set domain for Remote Access Community.
From the list choose the RemoteAccess Community click Set now choose a group that contains the networks in HQ1 and the network in the Branch1.
Click ok 3 times and push policy to the HQ1 gateway
Regards, Maarten

View solution in original post

Highlighted
Copper
Thank you bro. It works.
0 Kudos