AnsweredAssumed Answered

fw monitor shows additional chain position e

Question asked by Danny Philipse on Feb 6, 2018
Latest reply on Nov 18, 2018 by Heiko Ankenbrand

In fw monitor I am used to see only the chain positions i I o O.

Now I have seen also the chain position  e in my ouput.

I have never seen it before. I use fw monitor with filter on src and dst.

The traffic is supposed to go over the IPsec VPN begind interface eth1-01.

Because I am facing issues I want to make sure if this is relevant.

I run R80.10 JHF 56 clean install,

 

fw monitor -e 'accept src=10.1.1.1 and dst=8.8.8.8;'

 

[vs_0][fw_0] eth2.2022:i[60]: 10.1.1.1 -> 8.8.8.8 (ICMP) len=60 id=25411
ICMP: type=8 code=0 echo request id=18 seq=32331
[vs_0][fw_0] eth2.2022:I[60]: 10.1.1.1 -> 8.8.8.8 (ICMP) len=60 id=25411
ICMP: type=8 code=0 echo request id=18 seq=32331
[vs_0][fw_0] eth1-01:o[60]: 10.1.1.1 -> 8.8.8.8 (ICMP) len=60 id=25411
ICMP: type=8 code=0 echo request id=18 seq=32331
[vs_0][fw_0] eth1-01:O[60]: 10.1.1.1 -> 8.8.8.8 (ICMP) len=60 id=25411
ICMP: type=8 code=0 echo request id=18 seq=32331
[vs_0][fw_0] eth1-01:e[60]: 10.1.1.1 -> 8.8.8.8 (ICMP) len=60 id=25411
ICMP: type=8 code=0 echo request id=18 seq=32331
monitor: caught sig 2
monitor: unloading

 

Thanks for your time in advance.

Outcomes