Who rated this post

To set a static IP address to a MAC address on a Quantum Spark appliance, follow these steps:

1. Log in to the WebUI:

   • Open a web browser and connect to the Quantum Spark appliance's WebUI.

2. Navigate to the Network Settings:

   • Go to the Device view.
   • Click on the Network section.
   • Select the Local Network page.

3. Configure the Static IP Address:

   • In the Local Network page, look for the DHCP server settings.
   • Find the section for Static IP Address Assignment or DHCP Reservations.
   • Add a new entry by specifying the MAC address of the device and the desired static IP address.

4. Save the Configuration:

   • Click Apply or Save to save the changes.

Here is a more detailed step-by-step guide:

1. Log in to the WebUI:

   • Connect your computer to the Quantum Spark appliance.
   • Open a web browser and enter the appliance's IP address (e.g.,http://my.firewall).

2. Navigate to the Network Settings:

   • From the left navigation panel, click on Device.
   • Click on Network.
   • Select Local Network.

3. Configure the Static IP Address:

   • In the Local Network page, find the DHCP server section.
   • Look for Static IP Address Assignment or DHCP Reservations.
   • Click on Add or New to create a new reservation.
   • Enter the MAC address of the device you want to assign a static IP to.
   • Enter the desired static IP address.
   • Optionally, you can add a description for the reservation.

4. Save the Configuration:

   • Click Apply or Save to save the changes.

By following these steps, you can successfully assign a static IP address to a specific MAC address on your Quantum Spark appliance.