- Products
- Learn
- Local User Groups
- Partners
- More
What’s New in Device Diagnostics?
Dec 2nd @ 5pm CET / 11am EST
AI Security Masters
Security in the Pace of AI:
From Threat to Force Multiplier
CPX is Back!
Join us in Las Vegas, Vienna, and/or Bangkok!
Check Point Named a Leader
The Forrester Wave:
Enterprise Firewall Solutions, Q4 2026
What’s New in Agentic Network Orchestration
CheckMates Go:
Fun Ding
Hi Checkmates
I have 3 WAN links A,B & C so what I'm looking to do is keep WAN A & B in a single network group or Zone and route all traffic through them and if incase a link or both WAN links goes down failover happens to WAN C or load shares with the available link , is this possible in R80 or R81 embedded Gaia locally managed SMB 1600 appliance ?
#SMB 1600 R80.20 R81.10
You can set a weight when in load-sharing mode.
Additionally you can also bond interfaces, what type of links/interfaces are they?
Will likely depend on the link type... per the admin guide:
Link aggregation (Bond) - Create a link between two or more interfaces. This improves performance and redundancy by increasing the network throughput and bandwidth. A WAN or LAN bond can act like a regular internet connection in the cluster flow. A WAN bond in a cluster can be a monitoring interface.
Further granularity may be possible pending the future release of SD-WAN, if you have specific requirements I suggest discussing them with your local Check Point SE who can raise any applicable RFEs that might be needed.
You can set a weight when in load-sharing mode.
Additionally you can also bond interfaces, what type of links/interfaces are they?
yes I'm able to set weight for load sharing but my doubt was when is keep the Load sharing mode instead of HA mode all the 3 links are sharing the load that why I want to zone/group WAN A & B together so that I can keep them as active link and keep WAN C as failover link.
Is it possible to Bond WAN interfaces ? on WAN port I have ISP A and DMZ port I have ISP B I can bond them ?
Will likely depend on the link type... per the admin guide:
Link aggregation (Bond) - Create a link between two or more interfaces. This improves performance and redundancy by increasing the network throughput and bandwidth. A WAN or LAN bond can act like a regular internet connection in the cluster flow. A WAN bond in a cluster can be a monitoring interface.
Ok I will check this out and update the result but we can't group or zone the WAN interfaces together and create policies with them.
Further granularity may be possible pending the future release of SD-WAN, if you have specific requirements I suggest discussing them with your local Check Point SE who can raise any applicable RFEs that might be needed.
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 3 | |
| 3 | |
| 3 | |
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
Tue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsTue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsAbout CheckMates
Learn Check Point
Advanced Learning
WE SECURE YOUR AI TRANSFORMATION