Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
D_W
Advisor
Jump to solution

ospf routemap and route-redistribution at the same time

Hi Mates,

want to use routemaps and route-redistribution at the same time to propagate routes to ospf.

For example I want to define a nat-pool with 10.0.0.0/8 and redistribute it via route-redistribution.
I checked that there is no existing routemap with 10.0.0.0/8 but as long as any routemap is configured the route-redistribution seems to be ignored.

Gaia R81.10 JHF T156

Any idea?

Cheers,
David

1 Solution

Accepted Solutions
emmap
Employee
Employee

Routemaps take precedence over route-redistribution. Recommend not trying to mix methods as it will complicate things in future. 

View solution in original post

5 Replies
the_rock
Legend
Legend

One of my colleague and I did large ospf/bgp setup for a customer few years back and I cant recall about your exact point, but will check the config tomorrow and let you know.

Its on R81.20, but Im sure thats not overly relevant here.

Andy

emmap
Employee
Employee

Routemaps take precedence over route-redistribution. Recommend not trying to mix methods as it will complicate things in future. 

D_W
Advisor

Thanks for the feedback and you're right with the recommendation to not use them at the same time 😅
I'm also aware that routemaps take precedence but I was not able to use both at the same time.
I resolved it with additional routemaps but just wanted check if someone ever was able to use both possibilities at the same time

Cheers,
David

the_rock
Legend
Legend

So sorry David, got real busy today, apologies for not getting back to you. Will check it Tuesday and report back.

Andy

the_rock
Legend
Legend

@D_W 

Just checked the notes and yes, @emmap is 100% correct, routemaps will always take precedence over route distribution.

Andy

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events