Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
marki
Contributor

kernel: FW-1: stopping debug messages for the next 60 seconds

Hello,

Trying to debug an issue, kernel debugging intermittently stops with the message:

kernel: FW-1: stopping debug messages for the next 60 seconds

(or some other number close to 60 seconds)

How do I make it run continuously?

Thanks,

Marki

0 Kudos
2 Replies
the_rock
Legend
Legend

Maybe run fw ctl debug 0 and fw ctl debug -x commands and then try again. If that does not work, I would contact TAC, never seen that message before.

0 Kudos
Timothy_Hall
Legend Legend
Legend

Please provide the exact commands you are using, whether they are zdebug or the old way involving multiple commands.  You need to allocate a larger message buffer and/or specify additional filtering on your debug.  Example with a max size buffer and specifying matching IP addresses and port numbers:

    • fw ctl debug 0

    • fw ctl debug -buf 8192

    • fw ctl set str simple_debug_filter_saddr_1 “192.168.11.101”

    • fw ctl set str simple_debug_filter_saddr_2 “192.168.12.101”

    • fw ctl set int simple_debug_filter_dport_1 8000

    • fw ctl debug -m fw + conn

    • fw ctl kdebug -T -f > /var/log/all2

    • fw ctl debug 0
Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events