Solved: WEBUI session timeout

Jim_Fessler · ‎2016-03-16

WEBUI user section no longer has an option to change the session timeout. Will this be added?

Timothy_Hall · ‎2016-03-16

It is still there in the R80 Gaia web interface under System Management...Session, and also available through the clish command "set web session-timeout". I don't recall ever seeing the ability to set a per-user timeout for WebUI access.

--

My book "Max Power: Check Point Firewall Performance Optimization"

now available via http://maxpowerfirewalls.com.

Attend my online "Be your Own TAC: Part Deux" CheckMates event
March 27th with sessions for both the EMEA and Americas time zones

View solution in original post

Timothy_Hall · ‎2016-03-16

It is still there in the R80 Gaia web interface under System Management...Session, and also available through the clish command "set web session-timeout". I don't recall ever seeing the ability to set a per-user timeout for WebUI access.

--

My book "Max Power: Check Point Firewall Performance Optimization"

now available via http://maxpowerfirewalls.com.

Attend my online "Be your Own TAC: Part Deux" CheckMates event
March 27th with sessions for both the EMEA and Americas time zones

Ilmo_Anttonen · ‎2018-07-05

For SMB appliances running Gaia embedded the CLI command is: set administrator session-settings inactivity-timeout 'minutes'

At least for R77.20.x

Are you a member of CheckMates?

WEBUI session timeout