We have 2 15600 appliances with ClusterXL (active/standby)
Each of the nodes configured with 2 physical interfaces as an bond1 interface.
Operation Mode: 802.3ad
Transmit Hash Policy: Layer2 and LACP Rate: Slow
On top of the bond1 interface we configured 2 vlan's.
Link status in Gaia portal of the bond interface and vlan interfaces are Up.
cphaprob -a if shows me:
bond1 DOWN (88312 secs) non sync(non secured), unicast, bond Load Sharing (bond1.150)
bond1 DOWN (88312 secs) non sync(non secured), unicast, bond Load Sharing (bond1.151)
My questions is, must I also configure a static IP address on the bond1 interface or only on the bond1 vlan id's?
Thanks in advance.