Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
KostasGR
Contributor

VSX R80.40 lab at eve-ng Failed to remove the following drivers from GW machine:

Hello community

I have setup an eve-ng lab (distributed) with r80.40  latest JHF take  102.

During the creation of a VSX VSLS cluster gateway with two members i get the below error.

Tue May 4 10:46:12 EEST 2021: Failed to remove the following drivers from GW machine: fw_2 44678357 0 fw_1 44678357 0 fw_0 44678357 2 simmod_0 18789024 0

Any ideas?

BR,

Kostas

 

0 Kudos
6 Replies
Jerom_van_den_1
Explorer

Looks like an issue in the JHF, I am actualy trying a reconfigure right now without an jhf and this does seem to work.

Jerom_van_den_1
Explorer

Just to add another reply to this, also JHF Take 94 has this issue, so do not user this JHF as well.

0 Kudos
_Val_
Admin
Admin

It seems to be an issue with JHF 102 that affect reconfigure of VSX. Please use older Jumbo when installing GWs. Once VSX is set up, you can then upgrade GWs to 102.

jafara
Employee
Employee

Hi KostasGR,

 

In most cases this message means that we have failed to remove Firewall-1 driver due to some process (or more) that currently using the driver.

 

to understand which process is it, please SSH to the Gateway and run the following command (from Expert mode):
fuser /dev/fw0

This command will output the PIDs of the process that currently using the driver.

you can run "ps aux | grep <the pid you got>" in order to understand which process is it.

 

Please let me know which process currently using the Firewall so we can assist you.

 

 

0 Kudos
KostasGR
Contributor

Hello jafara

Finally i followed the  _Val_ solution.

Created first the VSX cluster object and then installed the JHF 102.

BR,

Kostas

_Val_
Admin
Admin

@KostasGR 

Just to make sure, that was a workaround and not a solution. I am glad it worked for you