VPN tunnels SNMP monitoring

[Spraki]

Hello CheckMates,

I have an S2S vpn tunnel deployed between two Check Point clusters managed from different SMS. I need to monitor the status of this tunnel via SNMP.

According to sk63663, 1.3.6.1.4.1.2620.500.9002.1.3 can be used for Regular Tunnel monitoring with the addition of the peer address. But all my attempts to view this tree were unsuccessful:
SNMPv2-SMI::enterprises.2620.500.9002.1.3 = No Such Instance currently exists at this OID

It is possible to see the tree only up to the value 500 (SNMPv2-SMI::enterprises.2620).

I downloaded the mib file $CPDIR/lib/snmp/chkpnt.mib and opened it through the mib browser. There I saw that SNMPv2-SMI::enterprises.2620.500.9002.1.3 available.

What could be the problem? The tunnel was raised all the time during the tests.

We have R81.10 with 87 JHF

[PhoneBoy]

Most likely this is going to require the TAC to investigate: https://help.checkpoint.com