Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Terry
Contributor

Upgrade from R77.30 to R80.30 fwk process error

I can't push policy after this upgrade. SIC is established and communicating on the physical firewall but not the VSX hosts. If you look below, the fwk process is not starting. Has anyone seen this before?

VS 6:

[Expert@FW-DR:6]# vsx stat -v
Error: The fwk process is down for vsid 6 (Please retry when the process is back up).

VS 0:

[Expert@FW-DR:0]# vsx stat -v

VSX Gateway Status
==================
Name: FW-DR
Access Control Policy: FW-DR_VSX
Installed at: 17Apr2020 12:43:32
Threat Prevention Policy: <No Policy>
SIC Status: Trust

Number of Virtual Systems allowed by license: 25
Virtual Systems [active / configured]: 0 / 2
Virtual Routers and Switches [active / configured]: 14 / 14
Total connections [current / limit]: 32 / 14900

6 | S DRFW01 | Unknown | Unknown | Unknown | Unknown

I get this error when installing policy:
Installation failed. Reason: Authentication error [ SIC error no. 147 ] check that peer SIC is configured properly and that system date and time on the Security Management Server and peer are synchronized

3 Replies
Maarten_Sjouw
Champion
Champion

Open a TAC case, this should really be handled by support.
Regards, Maarten
Terry
Contributor

5 hours into one. I will let this thread know the fix.
Raman_Arora
Contributor

@Terry - Do you remember how it was solved? reconfiguring or TAC found root cause and fix?

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events