Slow page loading issues and errors Internal system error in HTTPS Inspection due to categorization

[Arturxr]

Good afternoon, a few days ago, a problem with slow page loading appeared. Sometimes when loading a page, an error appears and after a couple of seconds the page loads completely.

At this point, the following errors may appear in the firewall logs:

Internal system error in HTTPS Inspection due to categorization service timeout

It turns out that the problem is not constant and appears from time to time, but there is no load on the CPU

We restarted the RAD process and there seemed to be no errors for a while, but then they continued to appear in the logs from time to time.

Have you encountered this behavior before?
We encountered this for the first time, since usually before, when we had problems with categorization, there was no access to the Internet at all, but now only at a certain time the pages start to load slowly

[PhoneBoy]

The behavior sounds consistent with issues related to RAD.
There are debug steps for it here: https://support.checkpoint.com/results/sk/sk92743

It's possible this may be fixed by applying the latest recommended JHF for your release.
More than likely, TAC will need to be involved.

[the_rock]

Out of curioisity, how are blade settings configured in smart console? Will send screenshot later of what Im referring to.

[the_rock]

This is what I meant, but here are screenshots, just in case.

https://community.checkpoint.com/t5/General-Topics/https-inspection-tip-feedback-suggestion/m-p/2530...

     

[Chris_Atkinson]

Do you have any rules in your HTTPS inspection policy with 'Any' or non-HTTP based services?

[the_rock]

Definitely good point Chris. I saw that be an issue before.

[the_rock]

One thing you can also test is add website(s) with the issue to bypass rule and see if it helps.