Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
HeikoAnkenbrand
Champion Champion
Champion
Jump to solution

R8x Ports Used for Communication by Various Check Point Modules (new version 2.1)

Introduction

This drawing should give you an overview of the used R80, R81 ports respectively communication flows. It should give you an overview of how different Check Point modules communicate with each other. Furthermore, services that are used for firewall operation are also considered. These firewall services are also partially mapped as implied rules in the set on the firewall.

Overview

Ports.png

Download PDF

Download R8x version 2.0:
R8x Ports Used for Communication PDF

SmartConsole Extention


New!

Now I have developed a SmartConsole Extension so that you can view the overview directly in the SmartConsole.
In the Access Policy section in the upper area, there is a tab called "Ports for Modules". More infos here.

Extension URL: https://www.ankenbrand24.de/ex/ports.json

picture_ports_1_6546456.jpg

References

Support Center: Ports used by Check Point software 

Versions

 

Version 2.1:
+ v2.1  all new R81.20 ports (Cloudguard + VPN + ClusterXL)             07/15/2024

old Version 2.0:
+ v2.0f new! now with SmartConsole Extension                                02/13/2023
+ v2.0e add LOM port 2048                                                                         01/31/2023
+ v2.0d  add LOM ports                                                                               01/23/2023

+
v2.0c  new colors + design                                                                      01/22/2023
+ v2.0b  best mistake 🙂  SmartDashboard versus SmartConsole     01/22/2023
+ v2.0a correct names : SMS, MDS, SmartConsole, ...                          01/21/2023

old Version 1.9:
+ v1.9a  add port 443 cloud CME  19.03.2022
+
v1.9b  fix port issue 442 cloud CME  22.03.2022

old Version 1.8:
+ v1.8a R81.10 EA update 04.05.2021
+ v1.8b add port 18264 30.05.2021
+ v1.8c R81.10 upgrade 28.07.2021

old Version 1.7:
+ v1.7a R81 EA update 17.07.2021
+ v1.7b bug fix 20.08.2021
+ v1.7c bug fix + new download link 25.06.2021

old Version 1.6:
+ v1.6a add Azure ports 05.05.2020
+ v1.6b add all cloud ports 15.06.2020

old Version 1.5:
+ v1.5a typos corrected 18.09.2019
+ v1.5b port update 26.01.2020

old version 1.4:
+ v1.4a bug fix, update port 1701 udp L2TP 09.04.2018
+ v1.4b bug fix 15.04.2018
+ v1.4c CPUSE update 17.04.2018
+ v1.4d legend fixed 17.04.2018
+ v1.4e add SmartLog and SmartView on port 443 20.04.2018
+ v1.4f bug fix 21.05.2018
+ v1.4g bug fix 25.05.2018
+ v1.4h add Backup ports 21, 22, 69 UDP and ClusterXL full sync port 256  30.05.2018
+ v1.4i add port 259 udp VPN link probeing 12.06.2018
+ v1.4j bug fix 17.06.2018
+ v1.4k add  OSPF/BGP route Sync 25.06.2018
+ v1.4l bug fix routed 29.06.2018
+ v1.4m bug fix tcp/udp ports 03.07.2018
+ v1.4n add port 256 13.07.2018
+ v1.4o bug fix / add TE ports 27.11.2018
+ v1.4p bug fix routed port 2010 23.01.2019
+ v1.4q change to new forum format 16.03.2019

old version 1.3:
+ v1.3a new designe (blue, gray), bug fix, add netflow, new names 27.03.2018
+ v1.3b add routing ports, bug fix designe 28.03.2018
+ v1.3c bug fix, rename ports (old) 29.03.2018
+ v1.3d bug fix 30.03.2018
+ v1.3e fix issue L2TP UDP port 1701

old version 1.1:
+ v1.1a - added r80.xx ports 16.03.2018
+ v1.1b - bug in drawing fixed 17.03.2018
+ v1.1c - add RSA, TACACS, Radius 19.03.2018
+ v1.1d - add 900, 259 Client-auth - deleted od 4.0 ports 20.03.2018
+ v1.1e - add OPSEC -delete R55 ports 21.03.2018
+ v1.1f - bug fix 22.03.2018
+ v1.1g - bug fix - add mail smtp -add dhcp - add snmp 25.03.2018

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
(37)
300 Replies
Artem_Kuznetsov
Explorer

Hi, Heiko! That's a great work!

But you were probably missed udp_259 between gateways. It's Check Point VPN-1 FWZ Key Negotiations (Reliable Datagram Protocol) which using for sending and receiveing VPN probes.

Petr_Hantak
Advisor
Advisor

This is really great job! Thank you for it and I'm glad that is still updating. Written document is one thing, but relations in the picture are great Smiley Happy

HeikoAnkenbrand
Champion Champion
Champion

Hi Artem,
thx, i have added port 259 UDP for link probing.

Best regards

Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
Isabel_Brenner
Participant

Nice document.

Georg_Polder
Participant

This is really great job!

THX

Huseyin_Rencber
Collaborator

Nice job !

AlekseiShelepov
Advisor

TCP 2010

FIBMGR - Forwarding Information Base Manager - Dynamic Routing Cluster configuration.

FIB Manager connections from / to cluster members on SecurePlatform OS with enabled Dynamic Routing.

From help in SmartDashboard R77.30: 

OSPF - Graceful restart
• Allow connections to port TCP 2010 over the sync network

From sk120355 

The routed process synchronizes OSPF and BGP routes via port 2010.

HeikoAnkenbrand
Champion Champion
Champion

Hi Aleksei,

thx, i have added port 2100.

Regards,

Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
Joerg_Enge
Participant

Very nice overview!

Tarique_Ali
Explorer

Great work.

Thomas_Werner
Employee Alumnus
Employee Alumnus

Hi Heiko,

great diagram - helps a lot.

Looks like TCP port 256 from Mgmt to GW is needed to fetch topology.

Also you may add this SK for reference:

Ports used by Check Point software 

Regards Thomas

HeikoAnkenbrand
Champion Champion
Champion

I add port 256 in the next version.

 

THX

Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
Patrick_Hanel
Participant

Thank you

Much better than the sk Smiley Happy

HeikoAnkenbrand
Champion Champion
Champion

Port 256 is added.

Regards,

Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
Sascha_Hasenst1
Contributor

Hello Heiko,

great picture. May it be possible to add two ports?

TCP/18264 on SmartCenter for fetching the CRL from the ICA (internal CA)

TCP/18265 on SmartCenter for accessing the ICA managemet Tool. Its very helpfull for checking certificates and their expiration-dates.

Best regards

Sascha

JozkoMrkvicka
Mentor
Mentor

Should be 2010, not 2100.

Kind regards,
Jozko Mrkvicka
0 Kudos
Rolf_Kaschek
Contributor

Thanks for the new diagram.

 

0 Kudos
Hugo_vd_Kooij
Advisor

If you install EndPoint Policy Management port 443 is no longer in use for GAIA. It will, by default, be moved to port 4434.

Secondary SmartConsole requires access to the port used above for any log tab that is not pointing directly to the SmartLog. (For example your SmartEvent, ....)

This can be a problem if high ports are blocked by default on another firewall.

I am not sure how to parse that information in the diagram you created. (Anyone a suggestion?)

<< We make miracles happen while you wait. The impossible jobs take just a wee bit longer. >>
0 Kudos
JozkoMrkvicka
Mentor
Mentor

LOM ports are not in the drawing (was mentioned there as well).

Required open TCP ports for LOM card functionality

Kind regards,
Jozko Mrkvicka
0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

Hi Jozko

I've been working hard with Check Point on this article R80.x Security Gateway Architecture (Logical Packet Flow)  the last few days and nights. That is why I have not reacted here.

Now to the topic:

I have a space problem in the A3 overview and I am converting it to a larger format. Please give me a few more days.

Regards,

Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
Saleme_Sabaj
Participant

Also nice owerview.

Thanks

Saleme

0 Kudos
Philipp_Schuste
Explorer

Hi Heiko,

as Jozko said this should be port TCP/2010 and not TCP/2100. Please correct this to prevent misconfigurations.

Thanks for your great work!

0 Kudos
Tobias_Karsbo
Contributor

Good job!!!

0 Kudos
Aleksandar_Oluj
Participant

Great job!

Kurt_Buckardt
Explorer

Well done, sir!  Thank you for making time to produce, update & share this!

Ralph_Heckler
Participant

Well done!

0 Kudos
Petr_Hantak
Advisor
Advisor

I agree that those should be mentioned. Especially TCP/18264 for first time connection to management server on R80. Otherwise you'll get an error "CRLs failed to be downloaded".

0 Kudos
Shinn_Ho
Participant

What were the ports need to be allow for the use of API if there was a firewall in between?

0 Kudos
PhoneBoy
Admin
Admin

The R80.x API runs over port 443.

Sven_Glock
Advisor

Hi Heiko,

maybe I found a missing communication channel.

What about Sandblast Detecting links to malicious files inside e-mails (sk115313)?

This needs communication to the internet. I am sure it is using http. No idea whether it can also use https or not.

Additionally TE appliance needs CPUSE and updates from Check Point, too.

Thanks for your excelent job.

Cheers

Sven

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events