R80.20 to R81.10

[Bendi0327_]

Hi!

I want to upgrade from R80.20 to R80.40 and then migrate to R81.10.

I have these real devices (3-3-2 pieces each):

• Check Point P-370
• Check Point ST-25
• Check Point T-180

Is it possible to do this? If so, could you please provide me with the necessary links? If these devices are too old for R80.40, is there any workaround for it?

This is my first experience with CP. Please let me know if any more information is needed.

Thanks, Bendi

[Chris_Atkinson · Accepted solution]

This hardware is end of support and won't go higher than R80.40 in an official capacity.

 https://sc1.checkpoint.com/documents/R80.40/WebAdminGuides/EN/CP_R80.40_Installation_and_Upgrade_Gui...

Refer also:

https://community.checkpoint.com/t5/Security-Gateways/Install-R81-on-Power-1-9070/td-p/105900

https://community.checkpoint.com/t5/Partner-News-and-Updates/Remove-R81-support-for-2012-appliances/...