Install R81 on Power-1 9070

[Thomas_Allen]

I have an old Power-1 9070 with 8Gig RAM that I want to install R81 on in the lab.  I am not looking for performance,   I used isomorphic, and can boot.

Available options:
------------------
1 - Boot from local disk
2 - 2000, 4000, 12000, 13000, 21000 series
3 - 3000, 5000, 6000, 15000, 16000, 23000, 26000 series
4 - Smart-1 5/25/50/200/400/525/3000/5050/5150
5 - Smart-1 150
6 - TE 250/TE1000/100X/250X/1000X/2000X
7 - 41000, 44000, 61000, 64000
8 - UTM-1, Power-1, DLP-1, VSX-1, IPS-1, Connectra, IP series
9 - Open Server with ACPI support
10 - Open Server without ACPI support
11 - Open Server with ACPI support (VGA)
12 - Open Server without ACPI support (VGA)
Default is 1, press <tab> for a list of options.

boot: 8

I chose option 8, and after some preliminary startup, I get this

  +--------------------+ Warning +---------------------+
  | |
  | Setup has detected the following appliance model: |
  | Power-1 9070. |
  | |
  | This model is not supported by this version. |
  | Please contact Check Point support. |
  | |
  | Installation will be aborted. |
  | |
  | +----+ |
  | | OK | |
  | +----+ |
  | |
  | |
  +----------------------------------------------------+

Is there anyway to bypass this?  Like I said, not looking for high performance from this, just want to look around.

[JozkoMrkvicka]

Try to install it as Open Server (option 9 or 10).

[Thomas_Allen]

I did try Open Server (both 9 and 10), same results

[PhoneBoy]

Officially not supported as noted by the boot message.
You may be able to make it work by editing /etc/appliance_config.xml before you run first-time wizard.
However, if you just want to have a look around, a VM might be a better choice.

[Timothy_Hall]

TAC might have a workaround, there is one available for installing R81 on the 2012 series appliances:

https://community.checkpoint.com/t5/Partner-News-Events-and-Updates/Remove-R81-support-for-2012-appl...