Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
the_rock
Legend
Legend

Question about sk102662

Hey guys,

I have a question about sk102662. So we followed the commands with TAC help on the phone, but when we do show route ospf via clish, nothing comes up. We even did routed debugs and it was complaining about tag number, we gave it tag 1, but same issue. We simply wanted to test one subnet to distribute from static to ospf.

 

Any idea if maybe another command is missing? 

 


fwpm1> show routemap static-to-ospf id 10

Routemap : "static-to-ospf" Id : 10 [permit]

Match Conditions:
IPv4 Prefixes :
1.2.3.0/24 Exact  
Protocol : static
Tag : 1

Actions:

Tx a lot for the help as always!

0 Kudos
5 Replies
Vladimir
Champion
Champion

Tags seem to be supported only for OSPF to BGP exports:

Configures the Route Map to match OSPF external routes with the specified tag value.

Multiple tag match conditions can be added to a given Route Map ID to broaden the range of tag values which are matched.

Currently this feature can only be used to export OSPF routes to BGP.

the_rock
Legend
Legend

We tried without a tag and its exact same issue...

0 Kudos
Vladimir
Champion
Champion

swap export and import to see if that works.

0 Kudos
(1)
the_rock
Legend
Legend

We did that last night, same thing, but will try again.

0 Kudos
the_rock
Legend
Legend

Just to update on this, if anyone ever has same problem in the future...CP config was fine, customer simply did not properly re-distribute right routes on Cisco end, that was it.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events