This answer is provided by Infinity AI Copilot and should be confirmed by reviewing official documentation in Support Center.
Good morning, Rajashekar! I hope you're doing well. For configuring Pool NAT in a Check Point firewall, you can refer to the SecureKnowledge article sk39327. This article provides detailed steps on how to configure IP Pool NAT addresses in a Check Point Cluster.
Here's a brief overview of the configuration process:
Enable IP Pool NAT:
- Open SmartDashboard and navigate to the Policy menu.
- Click on Global Properties and select NAT - Network Address Translation.
- Check the box to enable IP Pool NAT.
Create Network Objects:
- Create a Network, Group (of Networks), or Address Range object representing the IP Pool NAT addresses.
Configure IP Pool NAT on Cluster Members:
- Open the Cluster object properties in SmartDashboard.
- Expand NAT and click on IP Pool NAT.
- Define IP Pool NAT on each cluster member or on cluster member interfaces.
Install the Network Security Policy:
- Save your configuration and install the policy on the cluster object.
For more detailed instructions, including images and additional settings, please refer to the article. If you have any further questions or need additional assistance, feel free to ask!
