PBR with VPN

[PhongNN]

Hi Mates

Currently I am having a case like the following:

- We have a 5600 Appliance which has 2 external interfaces, one for Inbound traffic with public IP, one for Outbound traffic with private IP.

- We PBR for all DMZ server for Inbound interface, and users access to internet through Outbound interface with normal route.

- We want to Remote Access by Inbound inteface, but cannot. If i change default route in "normal" routing table from Outbound to Inbound, we can Remote Access VPN normally

I'm sure the problem is due to PBR, but is there any solution for remote access by Inbound interface?

Thank you and Best Regards.

[PhoneBoy]

Have you tried setting the "Link Selection" options here?
I suspect you'll have to adjust one or more of the options here:

[PhongNN]

Hi PhoneBoy

Thanks for your replay

I did it in the begining of deployment

And this is PBR table

And this is normal table routing

When i change the default route to Outbound ( 103.135.28.0/xx is Inbound), the Remote Access was stopped.