Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Aman_Choubey
Contributor
Jump to solution

Not Able To Find the Serial Number

Hi Every One.

I have a  UTM-1 570 and i want to get the Serial no of the device.But i am not able to do that.

Please suggest the CLI command to get the serial no of the unit.

thanks in advance.

0 Kudos
2 Solutions

Accepted Solutions
Vladimir
Champion
Champion
PhoneBoy
Admin
Admin
First of all, it would help if you had posted this in the correct space (should be Enterprise Appliances).
Given this is a UTM-1 570, it's highly likely this is running SPLAT, which I don't believe had a command to show the serial number.
Also, I recall some older appliances didn't have serial numbers burned into EEPROM or similar.

View solution in original post

0 Kudos
17 Replies
Vladimir
Champion
Champion

> show asset all

Aman_Choubey
Contributor

I tried this and it's not showing the Serial no of the Unit.

0 Kudos
Vladimir
Champion
Champion

Ok then, go to the "Expert" mode and execute:

dmiparse | grep ‘Serial Number’ 

0 Kudos
Aman_Choubey
Contributor
i also tried this,but no luck.
dmiparse |grep 'Serial Number'
Serial Number:
Serial Number:
Serial Number:
this is the output
Vladimir
Champion
Champion

how about running this from the "Expert" mode: 

system_info System Information

0 Kudos
Aman_Choubey
Contributor
for this,the output is:-
UTM-1
Not supported for this system
0 Kudos
Vladimir
Champion
Champion

Then in clish>

show asset hardware

 

0 Kudos
Aman_Choubey
Contributor
No, still no luck
0 Kudos
Vladimir
Champion
Champion

What OS are you running on that UTM unit?

0 Kudos
PhoneBoy
Admin
Admin
First of all, it would help if you had posted this in the correct space (should be Enterprise Appliances).
Given this is a UTM-1 570, it's highly likely this is running SPLAT, which I don't believe had a command to show the serial number.
Also, I recall some older appliances didn't have serial numbers burned into EEPROM or similar.
0 Kudos
Aman_Choubey
Contributor
thank you for the information.
0 Kudos
Aman_Choubey
Contributor
we are running on GAIA 77.10
0 Kudos
Maarten_Sjouw
Champion
Champion
You could use 'cpstat os'
This should give version info and info about the hardware, including serial number.
If that fails lookup the mac address of the Mgmt interface and look this up in the usercenter, there the serial number should also be mentioned.
Regards, Maarten
(2)
Aman_Choubey
Contributor
i got only"SVN Foundation Build Number:"
0 Kudos
Maarten_Sjouw
Champion
Champion
then again maybe pops up the question why would you need the serial number?
All equipment is registered by the Mgmt MAC address within Check Point, also the licenses.
Regards, Maarten
0 Kudos
Aman_Choubey
Contributor
yaa! but we are collecting the details for asset management only.
0 Kudos
G_W_Albrecht
Legend Legend
Legend

UTM 570 went completely out of support on 1-Apr-2017 - so regarding asset management, all we could do is recycle them, but not look at the serial... But maybe you want to play the serial number in the lottery ? 😁

CCSP - CCSE / CCTE / CTPS / CCME / CCSM Elite / SMB Specialist
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events