MVC R81.10 VSX VSLS Upgrade

[Magnus-Holmberg]

Hi,

So am trying to do some MVC upgrades to R81.10 on VSX VSLS but am managing to get strange statuses.
For the first box it works like a charm, but when i do second member i end up in active / active / down and similar statuses.
This is a test environment running open servers and only 2 test VS.

So process i have been doing is.

1: vsx_util upgrade
2: upgrade M3 with cpuse, (no HFA applied)
3: cphaconf mvc on

Here it currently has default policy.
Status Active on M3 GW and down on VS

4: Install policy on VSX Cluster
Successful on upgraded member and fail on none upgraded. 

When upgrading M2 and have done the above on that one aswell.
I start to get the none wanted statuses on the VS.
Ofc i can disable interfaces in the infrastructure so active / active dosn´t matter.

What you guys recommending, adding the HFA before the mvc etc?

Regards,
Magnus

[Magnus-Holmberg]

Looks like adding installing the HFA66 did do the trick to get correct statuses 🙂

[Daniel_Szydelko]

I personally always trying to install latest (or known as good enough) JHF GA and try to sort out if upgrade is working fine.

BR

Daniel.