Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
israelfds95
Contributor

LOM stop accessing Resolved, TIP

If the LOM loses its configuration in the first wizard, and stops accessing.

Access via Gaia expert and reconfigure with the following commands::

ipmitool lan print 8

To see the current LOM configuration

 

In the case above, the Source IP address was with DHCP Address, and without IP

So with

ipmitool lan set 8 <press enter>

I looked at the parameters, changed IP address Source to static

ipmitool-lan-set-8-option.png

So I configured the LOM's default IP again to have access to it again.

ipmitool-lan-set-8-ipsrc-and-ipaddr.png

lom-login.png

 

Other good commands

service ipmi start

ipmitool bmc reset cold

service ipmi stop

ipmi-start-stop.png

Clish Commands LOM

clish-lom.png


Bellow a good sk 


How to check the current LOM firmware version on Check Point appliances

https://support.checkpoint.com/results/sk/sk101250

lom-sk.png

 

 

 

 

(1)
1 Reply
PhoneBoy
Admin
Admin

Thanks for putting this together!

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events