Intervlan Routing is not working on Mgmt Interface for CheckPoint.
I have a New CheckPoint Firewall. On Mgmt Interface I configured L3 Sub Interfaces. In CheckPoint Mgmt Interface , need to have IP assigned , since I assigned One L3 Subnet on Mgmt Interface and created more Sub interface.
However I am not able to Ping any IP of that Subnet ( Mgmt Interface ) , from IT Network , but can Ping the Gateway from IT Network.
Also , Considering Mgmt Interface IP is 10.7.251.49 and a Server IP is 10.7.251.55 , they can Ping each other but not from IT Network. There is a OPSF between IT ( Cisco ) with CP firewall , I am redistributing the Mgmt Interface over OSPF.
CP Firewall has the route to network from where I am trying to Ping to Server IP is 10.7.251.55.
Cisco## sh run interface gigabitEthernet 3/0/48 ---- Mgmt Interface Connected
interface GigabitEthernet3/0/48
switchport trunk native vlan 2103
switchport mode trunk
Cisco##show mac address-table interface GigabitEthernet3/0/48
Mac Address Table
-------------------------------------------
Vlan Mac Address Type Ports
---- ----------- -------- -----
2103 MAC.MAC.MAC DYNAMIC Gi3/0/48
